EIPC3 Pump

Products Details

Internal gear pump Type EIPC3 for industrial applications with constant displacement volume Characteristics: • Internal gear pump with axial and radial gap compensation • Radial compensation with segments • Suction and pressure port radial • Field of application: Industrial hydraulic • Low noise • Long time life • Low pulsation (pressure pulsation ~2 %) • Multi flow combinations QQ0190107174246 Technical Data:
Rated Size 020 025 032 040 050 063 064
Spec. volume Vth [cm3/rev]*** 20,0 24,8 32,1 40,1 50,3 63,1 64,4
Continuous operating pressure [bar]** 250 180 250
Peak operating pressure [bar] max. 10 sec 15 % duty cycle** 320 300 280 210 280
Cut-in pressure peak [bar]** 350 325 300 210 300
Nominal speed [min-1] 200 – 3.400 200 – 3.200 200 – 3.000 100 – 2.500 100 – 1.800 100 – 1.800
Max. speed [min-1] 3.900 3.800 3.700 2.500 1.800 1.800
Nominal speed [min-1]**** 100 – 3.200 100 – 3.000 200 – 2.200 100 – 2.200
Max. speed [min-1]**** 3.600 3.600 2.400 2.400

Operating viscosity [mm2/s]  10 – 300

Starting viscosity [mm2/s] 2.000
Operating temperature [°C] -20 to +100
Operating medium HL – HLP DIN 51 524 part 1/2
Max. medium temperature [°C] 120
Min. medium temperature [°C] -40
Max. ambient temperature [°C] 80
Min. ambient temperature [°C] -40
Max. admission pressure (intake side) [bar] 2 bar absolute
Min. admission pressure (intake side) [bar] 0.8 bar absolute (Start 0.6)
Weight appr. [kg] 8,3 8,6 9,2 9,8 10,5 5,4

11,5

Degree of filtration Class 20/18/15 due to ISO 4406
Life expectancy not less than 1x 107 load cycles against peak operating pressure
Efficiency η vol: 93 93 94 95 95 94

95

Efficiency η hm: 91 92 92 93 93 92

93

Pump noise*(measured in sound chamber) dB[A] 62 63 64 65 66 64

68

n = 1.450 min-1 Δ p = 250 bar (180 bar at size 063) T = 50 °C Medium: HLP 46
* Measured in anechoic room of Eckerle Hydraulic Division; Axial microphone distance 1.0 m
** For acceptable pressure at 400–1.800 rpm. Further rpm on request. *** Due to manufacturing tolerances the displacement volume could vary. **** 2" suction port The pumps have no corrosion protection. The max. permissible values must not be applied cumulatively. Please contact us.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours